Starblade arcade full#

Do NOT press the 1 key prematurely here or you will screw up the calibration! Wait for a couple of seconds until it displays New max 4064. Take your foot off the brake turn key to abort. Just press the 1 key here again to move on. Move fully back and to side then turn key again. Since the seat feedback isn't implemented in the MAME driver, just go ahead and press the 1 key here.

Starblade arcade full#

Move seat full forward then turn key and release. After 10 seconds, press the 1 key while still holding down the F and G keys. Since fourth gear is in the lower-right corner, press and hold the F and G keys for 10 seconds. Put transmission in fourth then turn key again. After 5 seconds, press the 1 key while still holding down the D and R keys. Since first gear is in the upper-left corner, press and hold the D and R keys for 5 seconds. Put transmission in first then turn key and release. (I had to use the left analog stick on my controller, arrow key didnt work) After 10 seconds, press the 1 key while still holding down the right arrow. At this point, press and hold the Right key for about 10 seconds. Turn wheel clockwise as far as it will go then turn key.

After 5 seconds, press the 1 key while still holding down the left arrow. At this point, press and hold the Left key for about 5 seconds. Turn wheel counterclockwise as far as it will go then turn key. Make absolutely sure you haven't touched any of the controls up to this point, then press the 1 key. Take your hands and feet off all controls then turn key. Note that even if you have an analog control connected to any of the analog controls in the game, it is much easier to do calibration with the keyboard. Key: Maps to Player 1 start button (default: 1 key).Ībort: Maps to Player 2 start button (default: 2 key).įinally, here is a step-by-step tour through the calibration process. Fourth gear is button 5 (default: Z key). Third gear is button 4 (default: Left Shift). Second gear is button 3 (default: Space). First gear is button 2 (default: Left Alt). Operates the same way as the gas and brake pedals.Īnalog Shifter: (found in the non-compact versions only) Maps to the Player 2 analog joystick X/Y axes, which are mapped by default to the keys R, F, D, G.ĭigital Shifter: (found in the compact versions only) Maps to Player 1 buttons 2, 3, 4 and 5. Operates the same way as the gas pedal.Ĭlutch pedal: Pedal 3 control, by default maps to the Space key. Pressing the key will quickly depress the analog control releasing the key will release it.īrake pedal: Pedal 2 control, by default maps to the Left Alt key. Gas pedal: Pedal 1 control, by default maps to the Left Control key. Steering wheel: Player 1 Paddle control, by default maps to the mouse and the left/right arrow keys It's not very intuitive, so pay attention: You need to understand how the controls are mapped in MAME. NV (NVRAM) file for this game contained in your NVRAM directory, called harddriv.nv or racedriv.nv or the same as the setname you intend to use (for me was located at /home/pi/RetroPie/roms/arcade/mame2003/nvram/). If you are having trouble controlling vehicle or the brake is always on, calibration must be done!įirst off, Delete any. Found these instructions for calibrating and they work (I added a few of my own notes in bold):